 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Cree(R) SMD LED Model # LM-NRR-0-N Data Sheet 120-degree, 3.2 x 2.8-mm, SMT LED in full color with water-transparent lens Applications * * * * Indoor and Outdoor Displays Backlighting Coupling into Light Guides RGB Full-Color Displays Absolute Maximum Ratings (TA = 25C) Absolute Maximum Rating R 50 200 5 125 G 25 100 5 100 -40 ~ +100 -40 ~ +100 110 450 650 300 450 110 400 580 280 430 110 450 680 300 480 B 25 100 5 100 Items Forward Current Note 1 Symbol IF Note 2 Unit mA mA V mW C C C C/W C/W C/W C/W Peak Forward Current Reverse Voltage Power Dissipation IFP VR PD Topr Tstg TJ Note 3 Operation Temperature Storage Temperature Junction Temperature Junction/ambient 1 chip on RTHJA RTHJA RTHJS RTHJS Junction/ambient 3 chips on Note 3 Junction/solder point 1 chip on Junction/solder point 3 chips on Notes: 1. 2. 3. Single-color light. Pulse width 0.1 msec, duty 1/10. Rth test condition: mounted on PC Board FR 4 (pad size >=16mm2) Typical Electrical & Optical Characteristics (TA = 25C) Characteristics Condition IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V Symbol PEAK DOM 21/2 VF(avg) VF(max) IV(min) IV(avg) IR Values R 620 610~620 24 120 2.0 2.5 112 180 10 G 520 520~540 38 120 3.4 4.0 180 250 10 B 465 460~480 28 120 3.4 4.0 45 70 10 Unit nm nm nm C V V mcd mcd A D-CT142.000 Data Sheet: CL Wavelength at peak emission Dominant Wavelength Spectral bandwidth at 50% IREL max Viewing Angle at 50% IV Forward Voltage Luminous Intensity Reverse Current (max) Subject to change without notice. www.cree.com/ledlamps Standard Bins for LM-NRR-0-N (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown. Orders for LM1-NRR1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (D) values shown and specified are at IF = 20 mA. Luminous Intensity (IV) 280 mcd 180 mcd T or above S R 112 mcd 610 nm Dominant Wavelength (D) 620 nm Luminous Intensity (IV) 450 mcd 280 mcd U or above T S 180 mcd 520 nm Dominant Wavelength (D) 540 nm Luminous Intensity (IV) 112 mcd 71 mcd R or above Q P 45 mcd 460 nm Dominant Wavelength (D) 480 nm Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is 10%. 3. Tolerance of measurement of dominant wavelength is 1 nm. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 6. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT42.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Document No. Rev. No. SPE/LM1-NRR1-01-N1 02 Graphs Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. SPE/LM1-NRR1-01-N1 02 Graphs Graphs 50% Power Angle : 0 100% 80% 60% 40% 20% -90 -60 -30 0 30 60 90 0% FAR FIELD PATTERN 70 60 50 40 30 20 10 0 IF(mA) 70 60 RED 50 40 30 20 BLUE 10 T( C) 0 IF(mA) RED GREEN GREEN BLUE T( C) 0 20 40 60 80 100 0 20 40 60 80 100 70 60 50 40 30 20 10 0 IF(mA) 70 60 RED 50 40 30 GREEN 20 BLUE T( C) 10 0 IF(mA) RED GREEN BLUE T( C) 0 20 40 60 80 100 0 20 40 60 80 100 Format Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document 5/6 is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT42.000 #: Cree, Inc. 4600 Silicon Drive COTCO-D-074 REV.4 Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. SPE/LM1-NRR1-01-N1 02 Graphs Graphs the color coordinates of the mixed light can be expected within the area of the color triangle marked a). The color coordinates of the mixed light can be expected within the area of the color triangle marked "a)". the achromatic point (x=0.33,y=0.33) is marked"+" The achromatic point (x=0.33,y=0.33) is marked "+". Items Prepared by Checked by Approved by FCN# Signatures Meiliping XieJH DavidLiu Date 2005-12-14 2005-12-14 2005-12-14 Rev.No 02 Date Revision History Change Description 2005-12-14 Change IV Rank of G from R, S, T to S,T. FCN20050422 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT42.000 6/6 Format #: COTCO-D-074 REV.4 Document No. Rev. No. Dimension Draw ing Mechanical Dimensions displays uides ays i tings at Ta = 25C Symbol IF IFP VR PD Topr Tstg Tj *3 *3 SPE/LM1-NRR1-01-N1 02 All dimensions are in mm. Absolute maximum Rating R G B 50 25 25 200 5 125 100 5 100 -40~+100 -40~+100 +110 450 650 300 450 +110 400 580 280 430 +110 450 680 300 480 *3 Unit mA mA V mW C C C C/W C/W C/W C/W 100 5 100 Rth JA Rth JA Rth JS Rth JS on on idth <=0.1msec duty <=1/10 Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2) tical Characteristics ( Ta = 25C) ) Condition on IF=20mA IF=20mA Irel max Notes IF=20mA IF Compliance 2 1/2 RoHS=20mA Symbol peak Values R 620 610~620 24 120 G 520 520~540 38 120 B 465 460~480 28 120 Unit nm nm nm Deg. dom The levels of environmentally sensitive, persistent biologically toxic (PBT), V persistent organic pollutants (POP), or VF(avg) 2.0 3.4 3.4 otherwise restricted materials in this product are below the maximum concentration values (also referred to as the IF=20mA threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecVF(max) 2.5 4.0 4.0 V tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. 180 Iv 112 45 mcd 180 250 70 mcd Iv(Avg) Vision Advisory Claim VR=5V 10 10 10 A IR Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. IF=20mA (Min) Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number Contact Cree Sales Description SMD 120 Full Color, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT42.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps |
Price & Availability of LM1-NRR1-01-N1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |